Focusrite Scarlett Octopre マイクプリアンプ

Focusrite Scarlett Octopre マイクプリアンプBox ContentsAlong with your Scarlett OctoPre you should have:• AC mains cable with IEC connector• 4 x self-adhesive feet – stick to underside of unit for table-top usePrinted on the inside of the box: • Getting Started Guide• Bundle Code for on-line product registration**After registration, you will have access to downloads and licences for the following software: Softube Time and Tone bundleFocusrite Red 2 and Red 3 plug-in suiteSCARLETT OCTOPRE TECHNICAL SPECIFICATIONS Performance Specifications (All performance figures are measured to the AES17 standard). Sample Rates Supported sample rates 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz & 192 kHzMicrophone Inputs Frequency Response 20 Hz to 20 kHz, +0.5/-1.5 dBDynamic Range 109 dB (A-weighted)THD+N ＜0.001%Noise EIN –127 dBuMaximum input level (without PAD) 8 dBuMaximum input level (with PAD) 16 dBuGain Range 50 dBInput Impedance 3 kΩLine Inputs Frequency Response 20 Hz to 20 kHz, +0.5/-1.5 dBDynamic Range 109 dB (A-weighted)THD+N ＜0.002%Maximum input level 22 dBuGain Range 50 dBInput Impedance 49 kΩInstrument Inputs Frequency Response 20 Hz to 20 kHz, +0.5/-1.5 dBDynamic Range 108 dB (A-weighted)THD+N ＜0.01%Maximum input level 13 dBuGain Range 50 dBInput Impedance 1 MΩLine Outputs THD+N ＜0.001%Maximum Output Level (0 dBFS) ＞+16 dBu @ 0 dBFS, or＞21 dBu where ADAT output is not usedOutput Impedance 136 ΩPhysical and Electrical Characteristics Analogue Inputs Connectors “Combo XLR” sockets on rear panel; for Line use 1⁄4” TRS jack, for Inst use 1⁄4” TS jack.Mic/Line switching AutomaticLine/Instrument switching (Chs. 1 & 2 only) via front 2 x front panel switchesPhantom power 48 V, switchable Chs. 1-4, 5-8 in groupsOutputs Analogue outputs 8 x balanced, on rear panel 1⁄4” TRS jack socketsOther I/O ADAT Output 4 x TOSLINK optical connectors: 8 channels at 44.1/48 kHz (RH port*) 8 channels at 88.2/96 kHz (Chs 1-4 RH port*, 5-8 LH port*) 4 channels at 176.2/192 kHz (Chs 1 & 2 RH port*, 3 & 4 LH port*)Word clock output 2.5 V (correctly terminated with 75 ohms); BNC connectorWord clock input BNC connector: 5 V into 75 ohmsWeight and Dimensions W xD xH 482 mm x 44.5 mm x 286 mm 19” x 1.75” x 11.26”Weight 3.22 kg 7.10 lbs